Advertisement

TOTAL HARMONIC DISTORTION (THD+N): Less than 0,05% at rated output power at 1 KHz into 4Ω.

INTERMODULATION DISTORTION:
SMPTE: Less than 0,08% at 60Hz. 7KHz, 4:l ratio into 4Ω at rated output power:
DIM-30: Less than 0,04% into 4Ω.

INPUT SENSITIVITY:
Internally adjusted with jumper:
Open jumper: 0 dBv (0.775 V).
Closed jumper: +8dBv (1.95V). At rated output power (4Ω).

INPUT IMPEDANCE:
Balanced: 20KΩ. / Unbalanced: 10KΩ.

C.M.R.R.:
Greater than 70 dB, 20 Hz to 20KHz ref.full output.

DAMPING FACTOR:
Greater than 700 at 1 KHz into 8Ω.

HUM AND NOISE ("A" weighted):
Greater than 100 dB, 20 Hz to 20KHz ref.full output.

FREQUENCY RESPONSE:
20 Hz to 20KHz (-0,5 dB).

OUTPUT SLEW RATE:
Limited by input TIM filter to 30V/ms
Internally 60 V/ms.

CHANNEL SEPARATION:
Greater than 65 dB at 1KHz.

INPUT CONNECTORS PER CHANNEL:
MF8/MF12: XLR-3-3 l Balanced. Jack 1/4" Balanced.
MF16/MF24: XLR-3-3 l Balanced. XLR-3-32 Balanced.

OUTPUT CONNECTORES PER CHANNEL:
SPEAKON® and binding post.

INDICATORS:
CLIP LED (one per channel). /SIGNAL LED (one per channel).
THERMAL LED (one per channel).
ERROR LED (one per channel).
ON/STBY LED (one per channel). BRIDGE LED.

COOLING:
Forced air by continuously variable speed fan.
Front to back cooling.

PROTECTIONS:
Electronic against short-circuit and open circuit. / Thermal against heatsink and mains transformer overheating.
DC out by CROW BAR./ Magnetic circuit breaker (only MF16 and MF24).
Delayed switch on / Inrush transient / Input overvoltage.

OUTPUT POWER IN WATTS:
(RMS, 1 KHz, THD< 0,1%) (1 khZ, THD < 1%)

POWER SUPPLY:
MF8/MF12: 115/230V. (+10%, -30%. 50/60 Hz).
MF16/MF24: 230V. (+10%, 30%, 50/60 Hz.) (115 Volt special order).

POWER REQUIREMENTS:
MF8: 1500 V.A.
MF12: 2000 V.A.
MF16: 3000 V.A.
MF24: 4000 V.A.

NET/SHIPPING WEIGHT:
MF-8: 16Kg/20Kg.
MF-12: 17Kg/21Kg.
MF-16: 29Kg/33Kg.
MF-24: 30Kg/34Kg.

DIMENSIONS:
MF-8/MF-12: 483x89x384 m/m (19"x2u.).
MF-16/MF-24: 483x133x384 m/m (19"x3u.).

RACK MOUNT:450m/m with input XLR connectors.
« Back to Product List

Recommend this page on Facebook, Twitter or Google+: